J&K ORANGE PIPE HOLDER- KWIK KLAMP |
||||
1-2” | PVC or Galv. | $325.00 | ||
2 1/2”- 4” | PVC or Galv. | $625.00 | ||
5” | Conversion 10 Jaw Pads and 20 Bolts | $895.00 | ||
6” | PVC Use Only | $650.00 |
J&K KWIK KLAMP 1-2”
- All steel construction but light weight-only 14 lbs.
- Easy to operate, over center locking of jaws when downward pressure is applied to lever.
- KWIK KLAMP allows workers to bring pipe joint up to an easy working level.
- Equipped with serrated and hardened replaceable jaws.
- Excellent holding capability with load tests over 3500 lbs.
- Designed to hold pipes 1″ through 2″ PVC, stainless, & galvanized.
- Safety pin to prevent accidental unclamping.
- KWIK KLAMP is one of the safest time saving tools you will ever own.
Kwik Klamp 1 holding 2″ stainless steel pipe on 8″ casing.
The wide klamp base fits on many casing sizes.
J&K KWIK KLAMP 2 for Pipe Sizes 2 1/2″ – 4″
- Main body is constructed of 2″ and 2 1/2″ 1/4″ wall steel tube.
- Easy to operate, over center locking of jaws when downward pressure is applied to a 19″ long lever handle.
- 1/2″ Safety pin used to prevent accidental unclamping.
- KWIK KLAMP2 allows workers to bring pipe or drill joint up to and easy working level.
- The tool weights only 30 lbs. and is 20″ long x 7 1/2″ wide.
- Jaws are equipped with 16 carbide tipped grippers.
- Excellent holding capability, with load tests done over 7,000 lbs.
- Designed to hold pipes 2 1/2″, 3″ and 4″ PVC, HDPE, stainless and galvanized steel.
J&K Kwik Klamp 3 for Pipe Sizes 5-6”
- The heavy duty KWIK KLAMP 3 is designed to hold 6″ PVC pipe.
- This Klamp can also hold 5″ pipe with an additional jaw set.
- The KWIK KLAMP 3 is very similar to the KWIK KLAMP 2 which is for pipe sizes 2 1/2″ through 4″.
- The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well serviceman, and water well drillers.
- Main body is constructed of 2″ and 2 1/2″ 1/4″ wall steel tube.
- Easy to operate, over center locking of jaws when downward pressure is
applied to a 19″ long lever handle. - 1/2″ Safety pin used to prevent accidental unclamping.
- KWIK KLAMP 3 allows workers to bring pipe or drill joint up to an easy working level.
- The tool weights only 37 lbs. and is 20″ long x 7 1/2″ wide.
- Jaws are equipped with 20 carbide tipped grippers (3/8-16×1/2).
- Excellent holding capability, with load tests done over 7,000 lbs
- Designed to hold 6″ PVC or HDPE pipe.
Prices subject to change without notice. 08/06/23
Orange Pipe Holders