S10,000 SEMCO HYDRAULIC PUMP HOIST |
||||||||
S10 | Basic Pump Rig Painted White w/Hydraulic Outriggers | $ | 39,325.00* | |||||
The S10,000 basic rig, 30,000# cap., consists of a 40′ telescoping mast and 140′ per minute line speed at 10,000# single line. Also, as standard equipment is a 60 gallon oil reservoir, tandem hydro pump, 225′ of 9/16″ XIPS main line cable, 7 ton swivel safety bearing hook, fail safe brake, hydro control and variable speed engine control. Painted Standard SEMCO White. SEE OPTION LIST. | ||||||||
S10,000 OPTION LIST |
||||||||
WD | Wide Derrick Conversion (72″ Wide) | 1,045.00 | ||||||
S12,000H SEMCO HYDRAULIC PUMP HOIST |
||||||||
S12H | Basic Pump Rig Painted White w/Hydraulic Outriggers | $ | 43,865.00* | |||||
The S12,000H basic rig is 36,000# cap., consists of a 44′ hydraulic telescoping mast and 140′ per minute line speed at 12,000# single line. Also, standard equipmnet is a 72 gallon oil reservoir, tandem hydro pump, 22′ of 9/16″ XIPS main line cable, 11 ton swivel safety bearing hook, fail safe brake, hydro controls, and variable speed engine control. Painted White (S12,000 Old Style “A” Frame option has the 6,000# tail out winch, the S12H does not have the tail out winch also the S12H cannot have the power arm). | ||||||||
S10,000 & S12,000H SEMCO ADDITIONAL OPTION LIST |
||||||||
PD | PTO-Direct Mount Pump (5-6 Speed Manual) Air Shift ADD $140.00 | $ | 1,205.00 | |||||
HSP | Hot Shift PTO (Automatic Transmission) | 2,995.00 | ||||||
EX | Derrick Extension PER Foot | 625.00 | ||||||
2SW | 2 Speed Winch w/Grooved Drum | 2,665.00 | ||||||
SR | Sand Reel (2,000′ Cap. of 3/8″ Cable, Hydro Motor & GM Disc Brake) | 7,250.00 | ||||||
SM | Sand Reel (3,000′ Cap. of 3/8″ Cable, Hydro Motor & GM Disc Brake) | 8,425.00 | ||||||
S2 | Sand Reel (3,500′ Cap. of 1/2″ Cable, Hydro Motor & GM Disc Brake) | 18,315.00 | ||||||
HC | Hydraulic Oil Cooler 12VDC Dual Fans | 2,485.00 | ||||||
AB | Air Brake for Sand Reel (Additional) | 4,105.00 | ||||||
PR | Pipe Rack (w/2 Ratchet Straps) | 850.00 | ||||||
AH | Auxiliary Hydro Valve | 425.00 | ||||||
BO | Hydro Break Out Cylinder w/Valve | 1,205.00 | ||||||
CV | Cathead w/Valve | 1,760.00 | ||||||
RC | Remote Control | 2,125.00 | ||||||
BCO | Behind the Cab Outriggers | 3,650.00 | ||||||
PA | Power Arm (Old Style “A” Frame only) | 1,460.00 | ||||||
DB | 20 Ton Triple Line Block w/Safety Hook | 2,195.00 | ||||||
LK | Light Kit for Mast-Standard | 435.00 | ||||||
LEDLK | Light Kit for Mast-LED | 635.00 | ||||||
PTH | Power Tong Hook up to the Rear | 595.00 | ||||||
FM | Factory Mounting w/Hydraulic Oil | 2,365.00 | ||||||
AP | Add for Paint other than Standard Factory SEMCO White | 1,205.00 | ||||||
FLATBED, UTILITY BODY, & TOOL BOXES |
||||||||
SB8X12 | 8′ Wide,12′ Long w/Deck Plate & ICC Lighting (84″ CA)w/Headache Rack | $ | 3,505.00 | |||||
SB8X14 | 8′ Wide,14′ Long w/Deck Plate & ICC Lighting (102″ CA)w/Headache Rack | 4,385.00 | ||||||
SB8X16 | 8′ Wide,16′ Long w/Deck Plate & ICC Lighting (120″ CA) w/Headache Rack | 4,825.00 | ||||||
SB8X18 | 8′ Wide, 18′ Long w/Deck Plate & ICC Lighting (138″ CA) w/Headache Rack | 5,505.00 | ||||||
ADD | Additional Bed Length PER Foot | 365.00 | ||||||
132S | 132 Utility Body for 84″ CA | 11,435.00 | ||||||
156S | 156 Utility Body for 120″ CA | 13,415.00 | ||||||
SP | Special Paint-Paint Service Body other than factory SEMCO White | 875.00 | ||||||
30-36 | Tool Box 36″ Long, Single Door w/Locks | 695.00 | ||||||
30-48 | Tool Box 48″ Long, Single Door w/Locks | 865.00 | ||||||
30-60 | Tool Box 60″ Long, Single Door w/Locks | 950.00 | ||||||
D78 | Tool Box 78″ Long, Double Door w/Locks | 1,095.00 | ||||||
D96 | Tool Box 96″ Long, Double Door w/Locks | 1,185.00 | ||||||
PRICES EFFECTIVE FEBRUARY 1, 2018. SUBJECT TO CHANGE WITHOUT NOTICE. *THERE WILL BE AN ADDED 10% TARIFF SURCHARGE ON THE BASE PRICE DUE TO SUPPLIER PRICE INCREASES. |
S10,000 & S12,000