Well Service Unit:Used for installation of large submersible pumps, line shaft turbines and well completion. Two 4″ hydraulic outriggers at the rear with flatbed or service body option. |
|
| The specifications are as follows: | |
| Model Number: S8,000H | |
| Boom Capacity: 22,000 lbs.-3 part line (triple line option) | |
| Max. Vertical Boom Reach: 36’, 40’, 44′, & 46’ | |
| Max. Horizontal Boom Reach: 12’6″ | |
| Hydro System; Gear Pump 40 GPM @ 2,000 PSI | |
| Main Winch with Fail Safe Brake | |
| Planetary Gear Drive 60,000 in lbs. | |
| Capacity: 8,000 lbs. Single Line-Extended Derrick | |
| 16,000 lbs. Double Line-Extended Derrick | |
| 22,000 lbs. Triple Line-Fully Retracted Derrick | |
| Cable: 150′ of 1/2″ diameter | |
| Speed: 130 ft/min. | |
| Hydraulic Control : Manual | |
| Sand Line Winch with Disc Brake (free fall) | |
| Capacity: 3,000 lbs. Single line | |
| Cable Cap: 1,500′ of 3/8″ diameter | |
| Speed: 450 ft/min. (Max.) | |
| Hydraulic Control : Manual | |
| Waking Beam-Hydro Driven Stroker | |
| Speed: 30 Strokes Per Min. | |
| Pin-able Stroker Arm From 2-4′ | |
| Driven from a Hydraulic Motor that Connects to a 50:1 Gearbox | |
| 2 lockable tool boxes (96″ x 13″ x 16-1/2″) | |
| 2 lockable tool boxes (78″ x 13″ x 16-1/2″) | |
| 2 pipe storage racks | |
S8,000